I'm having problems installing the software. What should I do?

• See the suggestions below for your connection type.
  
  USB
  
  Make sure you followed the software installation instructions on the Start Here sheet. If the installation fails, make sure the printer is turned on and the USB cable is securely connected at both ends.
  
  If you're still having problems, disconnect the USB cable and uninstall the printer software, then reinstall it.
  
  Before reinstalling the software, check for the following:
  • Make sure the printer is not connected to your computer. (You will be prompted to connect it during the installation process.) You must connect the printer to your computer at the correct time to make sure the printer software is installed correctly on your computer.
  • Make sure your system meets the requirements.
  • Make sure all applications (including any screen savers, virus protectors, and firewall software) are closed.
  • Make sure you have administrative rights or software installation privileges to your computer.
  • In Windows, make sure the USB Controller is working properly in Device Manager. See your Windows help system for details. If it's not working, contact your computer manufacturer.
  Wireless network
  
  Before installing the software, make sure you set up your product as described on the Start Here sheet.
  
  If you're still having problems, uninstall the printer software, then reinstall it.
  
  Before reinstalling the software, check for the following:
  • If you're setting up the printer for the first time, make sure you have the correct SSID (wireless network name) and if security is enabled, the wireless network password (WEP key or WPA passphrase).
    
    This information is stored in your network's router and you may be able to access it by logging onto the router from your computer and checking its setup screens. If you are unable to access the information, contact the person who set up your network or the manufacturer of your router or access point for details. (Epson will not be able to provide this information to you.) You'll need to know the SSID and wireless network password before you set up the printer.
    
    Note:
    • The SSID and security key or passphrase are case sensitive. Be sure to correctly note uppercase, lowercase, and numeric/special letters.
    • The printer supports the following wireless security modes: WEP (64/128bit), WPA-PSK (TKIP/AES), and WPA2.
  • Make sure your system meets the requirements.
  • Make sure all applications (including any screen savers, virus protectors, and firewall software) are closed.
  • Make sure you have administrative rights or software installation privileges to your computer.