Support Printers All-In-Ones WorkForce Series Epson WorkForce WF-3530

What steps can I take to prepare my product for storage?

  • If you'll be placing your Epson printer into storage for a period of time, follow these storage guidelines to prepare the printer:

    Caution: When storing the product, avoid tilting it, placing it vertically, or turning it upside down; otherwise ink may leak. Leave the ink cartridges installed. Removing the cartridges can dry out the print head and may prevent the product from printing. Do not carry the product by the control panel; this may damage the product.

    When storing this product in a box, place it so that the control panel does not get damaged.

    Do the following:

    1. Turn off the product.
    2. Lift up the scanner and check that the print head is all the way to the right (home position). If necessary, turn on the product, then turn it off again. Leave the ink cartridges installed.
    3. Lower the scanner.
    4. Remove all the paper from the cassettes, and reinsert the cassettes.
    5. Unplug all the connected cables.
    6. Close the output tray.
    7. Pack the product in its original box or one of a similar size using protective material to keep it from moving inside the box.
    8. Keep the product level to prevent damage.

    If print quality has declined when you print again, clean and align the print head.

Published:  Jul 19, 2013 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​