How do I manually assign a static IP address to my product?

• Do the following:

  Windows

  1. Download and install the EpsonNet Config Utility from the Downloads tab for your product.
  2. Select Start > Programs > EpsonNet > EpsonNet Config.
  3. Highlight your printer's name, then click Configuration.
  4. Select Basic (under TCP/IP) and make sure Manual is selected. Enter the IP Address, Subnet Mask, and Default Gateway in the IP Address Setting section.

     
     
     

  5. Click Send.
  6. Close EpsonNet Config.

  OS X

  1. Download and install the EpsonNet Config Utility from the Downloads tab for your product.
  2. Open the Hard Drive. Select Applications > EpsonNet > EpsonNet Config v3 > EpsonNet.
  3. Highlight your printer, then click Configuration.
  4. Select Basic (under TCP/IP) in the Device Properties window.
  5. Select Manual. Enter the IP Address, Subnet Mask, and Default Gateway in the IP Address Setting section.

     
     
     

  6. Click Transmit.
  7. Close EpsonNet Config.