Can I connect my product to my wireless network using the buttons on the control panel?
Yes. See the instructions below.
Selecting Wireless Network Settings From the Control PanelYou can select or change wireless network settings using your product control panel.
To install your product on a wireless network, follow the instructions on the Start Here sheet and install the necessary software from the product CD or by downloading it. The installer program guides you through network setup.
Note: Breakdown or repair of this product may cause loss of fax and network data and settings. Epson is not responsible for backing up or recovering data and settings during or after the warranty period. We recommend that you make your own backup or print out your fax and network data and settings.
- Press the home button, if necessary.
- Press .
- Select Wi-Fi Setup. You see this screen:
- Select Wi-Fi Setup Wizard.
Note: If you need to disable the wireless network to set up your product on an Ethernet network, scroll down and select Disable Wi-Fi instead. Then follow the instructions on changing to a wired network connection in this manual.
- Select the name of your wireless network or enter the name manually.
Note: To enter the wireless network name manually, select Other Networks, then select the Network (SSID) field. Use the displayed keypad to enter your network name.
- Select the Password field, and enter your wireless password using the displayed keypad.
- Press when you’re finished entering your password, then select Proceed.
- Confirm the displayed network settings and select OK to save them.
Note: If you need to change a setting, press the back button.
- If you want to print a network setup report, press one of the buttons. (Otherwise, select Done.)
- Press the home button to return to the Home screen. If the network connection is successful, the Wi-Fi icon in the upper-right corner of the LCD screen is lit as shown.
Entering Characters on the LCD Screen