How do I connect my product to my wireless network using my product's control panel?

• See below.

  Selecting Wireless Network Settings From the Control Panel

  You can select or change wireless network settings using your product control panel.

  To install your product on a wireless network, follow the instructions on the Start Here sheet and install the necessary software. The installer program guides you through network setup.

  Note: Breakdown or repair of this product may cause loss of network data and settings. Epson is not responsible for backing up or recovering data and settings during or after the warranty period. We recommend that you make your own backup or print out your network data and settings.

  1. Press the arrow buttons to select Wi-Fi Setup and press the OK button. You see this screen:
     
  2. Select Wi-Fi Setup Wizard and press the OK button.

     Note: If you need to disable the wireless network to set up your product on an Ethernet network, press the down arrow button, select Disable Wi-Fi, and press the OK button. Then follow the instructions on changing to a wired network connection in this guide.

  3. Select the name of your wireless network and press the OK button.

     Note: To enter the wireless network name manually, select Other Networks and press the OK button. Use the printer's buttons to enter your network name.

  4. Enter your wireless password using the control panel buttons.
     
     

     Note: The network name and password are case sensitive. Be sure to correctly enter uppercase and lowercase letters, and numeric or special characters.

     • To enter letters or symbols, press the up or down arrow buttons to scroll through characters, and press the right arrow button to select one.
     • To enter numbers or change the case of letters, press the  Stop button.
     • To delete the previous character, press the left arrow button.
     • To enter a space, press the right arrow button.
  5. Press the OK button when you’re finished entering your password.
  6. Confirm the displayed network settings and press the OK button to save them.

     Note: If you need to change a setting, press the  Back button.

  7. If you want to print a network setup report, press the down arrow button, select Print connection report, and press the OK button. (Otherwise, press the OK button.) If the Wi-Fi connection symbol isn't lit or does not appear on the LCD screen, you may have selected the wrong network name or entered the password incorrectly. Repeat these steps to try again.
  Related references
  Status Icons