text.skipToContent text.skipToNavigation

My printout has lines running through it when I make a copy using the ADF (Automatic Document Feeder). What should I do?

    Carefully clean the scanner glass and ADF. See below.

    Cleaning Your Product

    To keep your product working at its best, you should clean it several times a year.

    Close the output tray and front cover when you are not using the product to protect it from dust.

    Caution:
    Do not use a hard brush, alcohol, or paint thinner to clean the product or you may damage it. Do not use oil or other lubricants inside the product or let water get inside it.

    1. Turn off the product.
    2. Unplug the power cable.
    3. Disconnect any connected cables.
    4. Open the ADF cover.

    5. Use a soft, dry, lint-free cloth (microfiber is recommended) to clean the rollers and the interior of the ADF.

    6. Close the ADF cover.
    7. Open the document cover.

    8. Clean the scanner glass and the glass area on the left with a soft, lint-free cloth (microfiber is recommended), moistened with a little glass cleaner.

      Caution:
      Do not spray glass cleaner directly on the glass and do not press the glass surface with any force.



    9. Press the tabs and remove the document mat.

    10. Use a soft, dry, lint-free cloth (microfiber is recommended) to clean the transparent part on the underside of the document mat.

    11. Replace the document mat by reversing the steps to remove it. Close the document cover.
    12. Clean the outer case and control panel with a soft, dry cloth. Do not use liquid or chemical cleansers.
Published:  Apr 19, 2018 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address