Support Printers All-In-Ones WorkForce Series Epson WorkForce Pro WF-4734

How do I manually assign a static IP address to my product?

  • Do the following:

    Windows

    1. Download and install the EpsonNet Config Utility from the Downloads tab for your printer.
    2. Do one of the following:

      • Windows 10: Click and select All apps > EpsonNet > EpsonNet Config.
      • Windows 8.x: Navigate to the Apps screen and select EpsonNet Config.
      • Windows (other versions): Select or Start > Programs > EpsonNet > EpsonNet Config.
    3. Highlight your printer's name and click Configuration.
    4. Select Basic (under TCP/IP) and make sure Manual is selected. Enter the IP Address, Subnet Mask, and Default Gateway in the IP Address Setting section.



    5. Click Send.
    6. Close EpsonNet Config.

    Mac

    1. Download and install the EpsonNet Config Utility from the Downloads tab for your printer.
    2. Open the Hard Drive and select Applications > Epson Software > EpsonNet > EpsonNet Config V4 > EpsonNet Config.
    3. Highlight your printer and click Configuration.
    4. Select Basic (under TCP/IP) in the Device Properties window.
    5. Select Manual. Enter the IP Address, Subnet Mask, and Default Gateway in the IP Address Setting section.
    6. Click Transmit.



    7. Close EpsonNet Config.
Published:  Apr 13, 2017 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​