How do I replace the maintenance box?

  • Make sure you have a new maintenance box before you begin.

    Caution:
    Do not reuse a maintenance box that has been removed and left uninstalled for more than a week. Keep the maintenance box away from direct sunlight.

    1. Remove the new maintenance box from its package.

      Caution:
      Do not touch the green chip on the maintenance box. Doing so may prevent normal operation and printing.

    2. Using a flat-tipped screwdriver, remove the screw on the maintenance box cover and remove the cover.
    3. Remove the used maintenance box.

      Note: Do not tilt the used maintenance box or take it apart.

      Caution:
      Do not touch the areas shown below on the maintenance box; otherwise, ink may leak.

      Warning: If ink gets on your skin, wash it thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. If ink gets into your mouth, spit it out immediately. Keep the maintenance box out of the reach of children and do not drink the ink.

    4. Place the used maintenance box in the plastic bag that came with the new maintenance box. Seal the bag and dispose of it carefully.
    5. Insert the new maintenance box and push it all the way in.
    6. Reattach the maintenance box cover and tighten the screw.
    7. Press the OK button on the product control panel to resume operation.
    Related references
    Ink Bottle and Maintenance Box Part Numbers
Published:  Oct 11, 2017 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​