I refilled the ink tanks after they were expended, but my nozzle check pattern still prints with gaps. What should I do?
The ink tubes may need to be filled with ink. Flush the ink tubes as instructed below.
Power Cleaning Using the Product Control PanelYou can run a Power Cleaning using the control panel on your product.
After a Power Cleaning, you must turn off the product and wait at least 12 hours before running another Power Cleaning.
- Turn off the product.
- Visually check the ink levels and make sure each ink tank is at least one-third full.
If you run a Power Cleaning when the ink levels are low, you may damage the product.
- Press and hold the power button and the help button at the same time until the Power Cleaning screen appears on the LCD screen.
- Follow the on-screen instructions to run the Power Cleaning.
- When the Power Cleaning is finished, run a nozzle check.
If the print quality does not improve after running the Power Cleaning utility multiple times, contact Epson for support.
Published: Nov 2, 2017 Was this helpful? Thank you for the feedback!