Support Printers All-In-Ones ET Series Epson ET-3750U for ReadyPrint

How do I reset the ink levels for my product?

  • If you refilled the ink tanks but the ink levels shown in the printer software are still low, you can reset the ink levels from the product's control panel by following the steps below.

    Note: The product has a low ink alert system. The accuracy of this system depends on the user refilling the ink tanks correctly. The product cannot directly measure the ink levels in the tanks; instead it estimates the amount of ink remaining by internally monitoring ink usage. The low ink alert system may generate inaccurate messages if the ink tanks are not refilled according to the instructions in the product's User's Guide.

    As a precaution, perform regular visual inspections of the ink tanks to ensure ink levels do not fall below the lower line. Continued use of the product when the ink level is below the lower line on the tank could damage the product.

    1. Press the home button, if necessary.
    2. Press the arrow buttons to select Maintenance > Reset Ink Levels.
    3. Select Next and press the OK button.
    4. Press the right or left arrow button to highlight the ink tank you refilled and press the OK button to select it. Repeat for each ink tank color you refilled.
    5. Select Reset and press the OK button. Then press the OK button again when the reset is complete.
Published:  Jul 9, 2020 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​