text.skipToContent text.skipToNavigation

How do I check my product’s network status?

    You can use a web browser to check the operating status of the product with the product’s built-in Web Config Utility, or you can print a network connection report to diagnose connection problems with the product on your network. See below.

    Accessing the Web Config Utility

    You can select your product's network settings and confirm its operating status using a web browser. You do this by accessing your product's built-in Web Config utility from a computer or other device that is connected to the same network as your product.
    1. Print a network status sheet.
    2. Locate the IP address for your product that is listed on the network status sheet.
    3. On a computer or other device connected to the same network as your product, open a web browser.
    4. Enter your product's IP address into the address bar. You see the available Web Config utility options.
    Related tasks
    Printing a Network Status Sheet

    Printing a Network Connection Report

    You can print a network connection report to view solutions to any problems you may have using your product on a network.
    1. Press the  home button, if necessary.
    2. Press the arrow buttons to select Settings and press the OK button. You see a screen like this:

    3. Press the arrow buttons to select Network Settings and press the OK button.
    4. Press the arrow buttons to select Connection Check and press the OK button.
    5. Press the  start button to print the network connection report.
    Examine the error codes and solutions shown on the network connection report.

    Related references
    Network Connection Report Codes and Messages
Published:  May 16, 2019 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address