My printout has lines running through it. What should I do?

• If you notice white or dark lines in your prints (also called banding), try these solutions before you reprint:

  • Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary.
  • Make sure the paper type setting matches the type of paper you loaded.
  • Make sure you loaded the printable side of the paper correctly for your product.
  • Turn off any high speed settings in your product software.
  • Adjust the print quality in the product software.
  • You may need to refill the ink. Visually check the ink levels.
  • If you have not used the product for a long time, run the Power Cleaning utility.

    Note: Power Cleaning consumes a lot of ink, so run this utility only if you cannot improve print quality by cleaning the print head.

  Related concepts
  Print Head Cleaning
  Print Head Nozzle Check
  Print Head Alignment
  Power Cleaning
  Check Ink Levels
  Related tasks
  Refilling the Ink Tanks
  Selecting Additional Layout and Print Options - Windows
  Selecting Printing Preferences - Mac
  Loading Paper in the Rear Paper Feeder
  Selecting Basic Print Settings - Mac
  Selecting Basic Print Settings - Windows
  Related references
  Paper or Media Type Settings - Printing Software
  Paper or Media Type Settings - Control Panel