Support Printers All-In-Ones WorkForce Series Epson WorkForce WF-7710

How should I transport or store my product?

  • If you need to store your product or transport it a long distance, prepare it for transportation as described here.

    Caution: During transportation and storage, follow these guidelines:

    • Because the product is heavy, two or more people should lift and carry it using the hand position shown:

    • Avoid tilting the product, placing it vertically, or turning it upside down; otherwise ink may leak.
    • Leave the ink cartridges installed. Removing the cartridges can dry out the print head and may prevent the product from printing.

    Note: Before storing your product for a long period, replace low, expended, or expired ink to help prevent the print head from drying out. Store your product in a cool, dry place.

    1. Turn off the product.
    2. Lift up the scanner unit.

    3. Make sure the print head is in the home position on the right.
    4. Secure the ink cartridge holder to the case with tape as shown.

      Caution:
      Do not touch the translucent film inside the product; otherwise, you may damage your product.

    5. Lower the scanner unit.
    6. Remove all the paper from the product.
    7. Unplug the power cable.
    8. Disconnect any connected cables.
    9. Close the rear paper feed slot and output tray and lower the control panel.

    10. Place the product in its original packing materials, if possible, or use equivalent materials with cushioning around the product. Make sure the box adequately protects the product control panel.

    Keep the product level during transportation. If print quality has declined when you print again, clean and align the print head.

    Related concepts
    Print Head Cleaning
    Print Head Alignment
Published:  Nov 16, 2017 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​