text.skipToContent text.skipToNavigation
Home Support Printers All-In-Ones WorkForce Series Epson WorkForce Enterprise WF-C17590

I'm having trouble sending or receiving faxes. What should I do?

    If you cannot send or receive faxes, try these solutions:

    • If an error code is displayed on the control panel, try the solutions suggested in the error code list.
    • If you are faxing from a computer, use the Epson FAX Utility to send your fax.
    • Make sure the recipient's fax machine is turned on and working.
    • Make sure paper is loaded correctly in your product.
    • Make sure you have set up your header information and have not blocked your caller ID. Otherwise, your faxes might be rejected by the recipient's fax machine.
    • If user restriction has been enabled, you may need to enter a user name and password. Contact your administrator for assistance.
    • If you did not connect a telephone to your product, set the Receive Mode setting to Auto so you can receive faxes automatically.
    • Check that the cable connecting your telephone wall jack to your product's LINE port is secure.
    • Print a fax connection report using your product control panel or fax software to help diagnose the problem.
    • Verify that the telephone wall jack works by connecting a phone to it and testing it.
    • If there is no dial tone and you connected the product to a PBX (Private Branch Exchange) phone line or Terminal Adapter, change the Line Type setting to PBX. If you still cannot send a fax, turn off the product's dial tone detection setting. (Turning off the dial tone setting may cause the product to drop the first digit of a fax number.)
    • If you connected your product to a DSL phone line, you must connect a DSL filter to the phone jack to enable faxing over the line. Contact your DSL provider for the necessary filter.
    • If your telephone line has static, turn off your product's error correction mode fax communication setting and try faxing again.
    • Try lowering your product's fax speed setting.
    • Make sure the error correction mode (ECM) setting is turned on if you are trying to send or receive a color fax.
    • If your telephone line uses call waiting and you have trouble receiving faxes, turn off call waiting to prevent disruption of incoming faxes.
    • If you have subscribed to a call forwarding service, the product may not be able to receive faxes. Contact your service provider for assistance.
    • Check your inbox and delete faxes after reading or printing them. If the inbox is full, the product cannot receive faxes.
    • If you cannot send faxes at a specified time, make sure the date and time are set correctly on the product.
    • If you cannot receive A3-size faxes, make sure you selected the correct paper size setting for the paper source containing the A3-size paper. Also, be sure to enable the paper source to receive faxes as the Auto Select Settings option.

    Note: If your product is connected to a VoIP (Voice over Internet Protocol) phone line, keep in mind that fax machines are designed to work over analog phone lines. Epson cannot guarantee that fax transmission will work when using VoIP.

    If your phone line includes voice mail answering services, calls or faxes may be inadvertently received by your voice mail service.

    Related tasks
    Connecting a Telephone or Answering Machine
    Using the Fax Setup Wizard
    Selecting the Line Type
    Selecting Advanced Fax Settings
    Receiving Faxes Automatically
    Printing Fax Reports
    Saving and Viewing Received Faxes
    Related references
    Job Status Error Codes
    Related information
    Loading Paper
Published:  Dec 14, 2017 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address