Support Printers All-In-Ones WorkForce Series Epson WorkForce Enterprise WF-M21000

My printout has lines running through it. What should I do?

  • If you notice white or dark lines in your prints (also called banding), try these solutions before you reprint:

    • Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary.
    • Make sure the paper type setting matches the type of paper you loaded.
    • Make sure you loaded the printable side of the paper correctly for your product.
    • Turn off any high speed settings in your product software.
    • Adjust the print quality in the product software.
    • When horizontal banding appears or the top or bottom of the paper is smeared, load paper in the correct direction and slide the edge guides to the edges of the paper.
    • If you continue to see horizontal bands or streaks in your printouts after cleaning the print head and adjusting the print quality, make print quality adjustments for each paper type.
    • If you are copying from the ADF, copy from the scanner glass instead or use a higher quality setting.
    • When vertical banding appears or the paper is smeared, clean the paper path.
    • You may need to replace the ink cartridges.
    Related concepts
    Print Head Maintenance
    Related tasks
    Selecting Additional Print Options - Windows
    Selecting Printing Preferences - Mac
    Related references
    Paper or Media Type Settings - Printing Software
    Related information
    Loading Paper
    Replacing Ink Cartridges and Maintenance Boxes
Published:  Aug 6, 2020 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​