Support Printers All-In-Ones WorkForce Series Epson WorkForce Pro WF-C5890

How do I check my product’s network status?

  • You can use a web browser to check the operating status of the product with the product’s built-in Web Config Utility, or you can print a network connection report to diagnose connection problems with the product on your network. See below.

    Accessing the Web Config Utility

    You can select your product's network settings and confirm its operating status using a web browser. You do this by accessing your product's built-in Web Config utility from a computer or other device that is connected to the same network as your product.

    Note: You can also access the Web Config utility from the product information area in the Epson Smart Panel app.

    1. Print a network status sheet.
    2. Locate the IP address for your product that is listed on the network status sheet.
    3. On a computer or other device connected to the same network as your product, open a web browser.
    4. Enter your product's IP address into the address bar.

      Note: The printer uses a self-signed certificate when accessing HTTPS. This may cause a warning message when you access Web Config. This does not indicate a problem and can be ignored.

    5. On the first visit to the Web Config utility, you will be prompted to set an administrator password. The administrator password is required to access the full capabilities of the Web Config utility.
    You see the available Web Config utility options.

    Note: The administrator password is required to access the full capabilities of the Web Config utility. The default password is the product's serial number. Check the label on your product to locate the serial number.

    Printing a Network Connection Report

    You can print a network connection report to view solutions to any problems you may have using your product on a network.
    1. Press the  home button, if necessary.
    2. Select Settings > General Settings > Network Settings > Connection Check.
    3. Select Print Check Report.

      Note: Select OK to return to the Network Settings menu without printing a report.

    4. Select Print.

    Examine the error codes and solutions shown on the network connection report.

    Related references
    Network Connection Report Codes and Messages
Published:  Jan 1, 2023 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​