How do I connect my WPS-enabled wireless router to my product?
-
See below.
Using WPS to Connect to a Network
If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to connect your product to the network.- Press the home button, if necessary.
- Select the icon.
- Select Wi-Fi (Recommended).
- Select Start Setup or Change Settings.
- Select Push Button Setup (WPS).
- Follow the instructions on the LCD screen to complete WPS setup.
Note: Make sure you select Start Setup within two minutes of activating WPS on your router.
- Press the home button to return to the Home screen. The Wi-Fi icon is displayed on the LCD screen and indicates your wireless connection status. If the product is not connected to the network, repeat these steps to try again.
If you are printing from a computer, make sure you installed the network software as described on the Start Here sheet.
Status Icon Information
Published: Sep 8, 2022
Was this helpful? Thank you for the feedback!