Support Printers All-In-Ones WorkForce Series Epson WorkForce WF-2950

How do I connect my product with a Wi-Fi Direct connection?

  • See below.

    Enabling Wi-Fi Direct (Simple AP) Mode

    You can enable Wi-Fi Direct mode to allow direct communication between your product and computer, mobile devices, or other devices (up to 8) without a wireless router or access point.

    Note: Make sure the Epson Smart Panel app or another compatible Epson printing app is installed on your mobile device before connecting to the product.

    1. Press the  home button, if necessary.
    2. Select the icon and press the OK button. You see a screen like this:

    3. Select Wi-Fi Direct > Start Setup. The product information is displayed on the screen.
    4. Do one of the following:
      • Open the Epson Smart Panel app on your device and use the information on the LCD screen to select your product. Skip to step 7.
      • To connect without using the Epson Smart Panel app, select Other Methods and go to the next step.
    5. Do one of the following:
      • For iOS devices, select iOS. Scan the QR code with the camera app on your device and follow the instructions on your device.
      • For other types of devices, select Other OS Devices. Press the down arrow button to display the product information, then use your device to select the Wi-Fi network name (SSID) displayed on the LCD screen and enter the password shown.
    6. Select Complete on the LCD screen. The blue Wi-Fi Direct icon is displayed on the LCD screen and indicates if Wi-Fi Direct is enabled on the product.
    Related tasks
    Using the Epson Smart Panel Mobile App
    Related references
    Status Icon Information
Published:  Aug 18, 2022 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​