How do I check my product’s network status?

• You can use a web browser to check the operating status of the product with the product’s built-in Web Config Utility, or you can print a network connection report to diagnose connection problems with the product on your network. See below.

  Accessing the Web Config Utility

  You can select your product's network settings and confirm its operating status using a web browser. You do this by accessing your product's built-in Web Config utility from a computer or other device that is connected to the same network as your product.

  Note: You can also access the Web Config utility from the product information area in the Epson Smart Panel app.

  1. 
     
  2. Locate the IP address for your product that is listed on the network status sheet.
  3. On a computer or other device connected to the same network as your product, open a web browser.
  4. Enter your product's IP address into the address bar.

     Note: The printer uses a self-signed certificate when accessing HTTPS. This may cause a warning message when you access Web Config. This does not indicate a problem and can be ignored.

  5. Select Log In and enter the administrator password. The administrator password is required to access the full capabilities of the Web Config utility. The default password is the product's serial number. Check the label on your product to locate the serial number.
  You see the available Web Config utility options.

  Printing a Network Status Sheet

  You can print a network status sheet to help you determine the causes of any problems you may have using your product on a network.
  1. Press the  home button, if necessary.
  2. Select Settings > General Settings > Network Settings > Network Status > Print Status Sheet > Print.
  3. Press the OK button.
  Examine the settings shown on the network status sheet to diagnose any problems you have.