How do I scan using my product's control panel?

• You can scan an image to your computer using your product's control panel buttons.

  Your product automatically selects default scan settings, but you can view or change them as necessary. You can change the default scan settings using the Event Manager utility on the computer.

  1. Make sure you installed the product software and connected the product to your computer or network.

     Note: Restart your computer after installing the product software to enable scanning from the control panel.

  2. Place your original on the product for scanning.
  3. Press the  home button, if necessary.
  4. Press the left or right arrow button to select Scan to Computer option and press the OK button.

     Note: If you are using a WSD port to connect to your computer, select To WSD and select a computer.

  5. Press the left or right arrow button to select a scan option and press the OK button.
     • Preview on Computer previews the scanned image on a computer before saving (Windows 7 or later or OS X 10.11.x or later).
     • Save as JPEG saves your scan as a JPEG file on your computer or as an image capture on a Mac.
     • Save as PDF saves your scan as a PDF file on your computer or as an image capture on a Mac.
  6. Do one of the following:
     • If you are scanning to a network computer, select the target computer from the list.
     • If your product is connected directly to your computer with a USB cable, select USB Connection.
  7. Press the  start button to start scanning.