How do I replace an ink cartridge?
- Install Replacement Ink Cartridge when an ink low or out condition occurs - Remove the yellow tape seal from the ink cartridge. Do not remove the blue label from the top of the ink cartridge. The ink in a cartridge missing the blue label will be exposed to air and will thicken such that print head clogging and possible print head failure can occur. Then make sure the printer is on but not printing. Raise the printer cover, then press down the cleaning button until the print heads move to the left. Install the ink cartridge and press the cleaning button to begin charging the ink delivery system. Charging takes about two minutes and is complete when the power light stops flashing. Caution: If the blue label has been removed from the ink cartridge, do not install the cartridge. If you have already installed it, even if the printer is printing correctly, change the cartridge immediately. If you have already installed the cartridge and now the nozzle check will not print completely even after running a few cleaning cycles, the printer may need service and you should contact Epson technical support for assistance.
Was this helpful? Thank you for the feedback!