How do I replace an ink cartridge?
- Make sure the printer is on but not printing. Raise the printer cover, then press the yellow ink cartridge replacement button until the print heads move to the left. Pull up the empty ink cartridge clamp all the way. The cartridge rises up from its holder and should be disposed. Don't touch the green circuit board on the back of the new cartridge; you may inhibit normal operation and printing. Remove only the yellow tape seal from the top of the new ink cartridge. Do not remove any other labels. Removing the wrong label from the ink cartridge will damage the ink cartridge. To install the new cartridge, tilt the ink cartridge forward slightly as you lower it into its holder. Hang the tabs at the back of the cartridge on the hooks on the holder clamps. Don't place the cartridge tabs under the hooks on the holder clamp; you may damage the clamp when you close it. Install the ink cartridge and press the yellow ink cartridge replacement button to begin charging the ink delivery system. Charging takes about a minute and is complete when the power light stops flashing.
Was this helpful? Thank you for the feedback!