How do I mount the M-Tracer on a golf club?

• Do the following:

  1. Place the attachment around the grip. First try the medium size attachment.

     For a thinner grip like on Ladies and Junior clubs, try the small size attachment. For thicker grip, try the large size attachment.

     The on the attachment should point to the same direction as the golf club. If the attachment is placed upside-down, the attachment will become loose and fly off the club.

     

     Make sure the center of the attachment is aligned with the center of the golf club.

     

     Slide the attachment from the shaft onto the grip of the golf club. If the attachment is too light, widen it with your finger.

     Caution:
     Do not widen the attachment too much, otherwise the attachment will break. If the attachment is loose, do not use the product.

  2. Put the strap around the club shaft.

     

     Caution:
     Always put the strap around the golf club shaft.

  3. Slide the M-Tracer onto the attachment until it comes in contact with the stoppers at the end of the attachment.

     

     Note:

     Do not push too hard when the attachment is tight on the grip of the golf club. Try a thinner grip area or a larger attachment.

     If the attachment is too loose, try a thicker grip area or a smaller attachment.

  4. Make sure the M-Tracer is firmly attached to the golf club grip.

     Caution:
     The device should not move when attached to the grip.

     

     Note:

     Make sure the device is attached to the underside of the club.

     If the product is scratched while mounting, it should not affect its functioning.