What do the LEDs on the M-Tracer mean?

• See the table below:

  

  Status LED (blue and red)	Charging LED (orange)	Status and solution
  Blue LED turns on for one second then flashes blue once every two seconds	Off	Product is turning on.
  Flashing blue twice every two seconds	Off	The device is communicating with a mobile device.
  Blue LED turns on and then off	Off	Product is turning off.
  Flashing red once every five seconds	Off	The battery's charge is low. Charge the device.
  Flashing blue and red alternately	Off	The device is in pairing mode.
  Flashing red once every second	Off	Error. Turn the device off and turn it on again.
  Red LED turns on for five seconds and turns off for half a second repeatedly	Off	Hardware error. Turn off the device and contact Epson for help.
  On or flashing purple	Off	Hardware error. Turn off the device and contact Epson support for help.
  Off	Orange	Product is charging.

  Note: If the LEDs display a pattern not listed in the table above, turn off the M-Tracer and contact Epson support for help.