What settings do the DIP switches control?

• The LQ-850, LQ-950 and LQ-1050 have two 8-position DIP switches.
  These switches are located at the rear of the printer.
  
  

  Country	SW 1-1	SW 1-2	SW 1-3
  USA	ON	ON	ON
  France	ON	ON	OFF
  Germany	ON	OFF	ON
  United Kingdom	ON	OFF	OFF
  Denmark	OFF	ON	ON
  Sweden	OFF	ON	OFF
  Italy	OFF	OFF	ON
  Spain	OFF	OFF	OFF

  
  

  Switch	ON	OFF
  SW 1-4	Graphic Characters	Italic Characters
  SW 1-5	Unidirectional Graphics	Bidirectional Graphics
  SW 1-6	Not Used	Not Used
  SW 1-7	CSF Enabled	CSF Disabled
  SW 1-8	0K Input Buffer User-Defined Characters Enabled	6K Input Buffer User-Defined Characters Disabled
  SW 2-1	12" Page Length	11" Page Length
  SW 2-2	1" Skip over Perf	Skip over Perf Inactive

  
  

  Interface/Parity	SW 2-3	SW 2-4
  Parallel	OFF	OFF
  Serial/Even	OFF	ON
  Serial/Odd	ON	OFF
  Serial/None	ON	ON

  
  

  Baud Rate	SW 2-5	SW 2-6
  9600	OFF	OFF
  *4800/19200	ON	OFF
  1200	OFF	ON
  300	ON	ON

  
  

  Switch	ON	OFF
  SW 2-7	Tear Off Mode ON	Tear Off Mode OFF
  SW 2-8	CR Produces CR + LF	CR Only

  *NOTE - Baud rate of 19200 is available with N9xxxx firmware only.