What settings do the DIP switches control?
The LQ-850+ and LQ-1050+ have two 8-position DIP switches. These switches are located at the rear of the printer.
International character set/Graphics character set
SW 1-1, 1-2, 1-3 see table 1 and 2
Switch ON OFF 1-4 Graphic Characters Italic Characters 1-5 Unidirectional Graphics Bidirectional Graphics 1-6 High speed draft Normal 1-7 CSF Enabled CSF Disabled 1-8 1" Skip over Perf Skip over Perf Inactive Page Length SW 2-1 SW 2-2 11 inches OFF OFF 12 inches ON OFF 8.5 inches OFF ON 11.7 inches ON ON Interface/Parity SW 2-3 SW 2-4 Parallel OFF OFF Serial/Even ON OFF Serial/Odd OFF ON Serial/None ON ON Baud Rate SW 2-5 SW 2-6 9600 OFF OFF 19200 ON OFF 1200 OFF ON 300 ON ON
Table 1 International Character Set
Switch ON OFF SW 2-7 Tear Off Mode ON Tear Off Mode OFF SW 2-8 CR Produces CR + LF CR Only
Table 2 Graphics Character Sets
Country SW 1-1 SW 1-2 SW 1-3 USA ON ON ON France ON ON OFF Germany ON OFF ON United Kingdom ON OFF OFF Denmark OFF ON ON Sweden OFF ON OFF Italy OFF OFF ON Spain OFF OFF OFF Graphics Type SW 1-1 SW 1-2 SW 1-3 United States ON ON ON Multilingual ON ON OFF Portugal ON OFF ON Canada-French ON OFF OFF Norway OFF ON ON
Was this helpful? Thank you for the feedback!