How do I manually assign a static IP address to my product?

  • Do the following:

    1. Download and install the EpsonNet Config Utility from the Downloads tab on your product's support page.
    2. Do one of the following:
      • Windows 11: Click , then search for EpsonNet Config and select it.
      • Windows 10: Click and select EpsonNet > EpsonNet Config.
      • Windows 8.x: Navigate to the Apps screen and select EpsonNet Config.
      • Windows (other versions): Select or Start > Programs > EpsonNet > EpsonNet Config.
      • Mac: Open the Applications folder, open the Epson Software folder, and select EpsonNet > EpsonNet Config > EpsonNet Config.
    3. Highlight your printer's name and click Configuration.
    4. Select Basic (under TCP/IP) and make sure Manual is selected. Enter the IP Address, Subnet Mask, and Default Gateway in the IP Address Setting section.

       
    5. Click Send or Transmit.
    6. Close EpsonNet Config.
Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​