What conditions do my product's status lights indicate?
The lights on top of the projector indicate the projector's status and let you know when a problem occurs.
|Power light||Warning light||Status / Description|
|Green||Off||The projector is operating normally|
|Flashing Green||Off||The projector is warming up. Wait for the image to appear.|
|Orange||Flashing Orange||The lamp is almost burned out. This is a good time to replace it.|
|Orange||Off||The projector is in sleep mode. You can unplug it or press the Power button to turn it on.|
|Flashing Orange||Off||The projector is cooling down. Wait for the light to become solid before unplugging it|
|Flashing Orange||Flashing Orange (quickly)||The projector is too hot. Make sure the temperature surrounding the projector does not exceed 950F and there is plenty of space around and under the projector for ventilation. Clean the air filter, if necessary.|
|Flashing Red||Flashing Red (quickly)||The lamp is burned out. Replace it.|
|Flashing Red||Flashing Red||There is an internal error in the projector. Turn the projector off and unplug it. Contact EPSON for help.|
|Red||Flashing Red||There is a problem with the cooling fan, Temperature sensor, or lamp. Turn off the projector and unplug it. Contact EPSON for help.|
|Off||Flashing Red||The projector has overheated and turned itself off. Let it cool for a few minutes, then turn it back on. Make sure there is plenty of space around and under the projector for ventilation. If it continues to overheat, you may need to change the air filter.|
Was this helpful? Thank you for the feedback!