My image has a blue cast when I connect my video equipment to my product with a VGA connection. What should I do?

• The problem could be caused by the connection or configuration of your video equipment. Check the following:
  • Make sure your component video cable is properly connected. The connectors on the cable are color-coded. The red, green, and blue connectors should be attached to the red, green, and blue component video-out connectors on your equipment and the red, green, and blue component video-in connectors on the projector.
  • Make sure the projector's Input Signal setting is set correctly to match the output signal of your connected video equipment.
  • Make sure the connected video equipment is set up to output video to component video.
  • If the DVD or HD signal appears in green, adjust the input settings to YPbPr by selecting Menu>Settings>Input signal>Component>YPbPr.