Support Projectors PowerLite Series Epson PowerLite 85

Part of my image is blurred or out of focus. What should I do?

  • Try the following:
    • Adjust the focus using the focus ring. See Focusing and Zooming Your Image.
    • Make sure the projector is facing the screen squarely, to eliminate the need for keystone correction.
    • There may be dirt or smears on the lens. See Cleaning the Lens.
    • Make sure the projector is within the proper range (2.8 to 45.5 feet) from the screen.
    • Make sure the input signal setting on the Signal menu matches the signal from the connected device. See Adjusting Signal Settings.
    • Make sure the lens is not fogged by condensation. If you've just moved the projector from a cold environment, wait a couple of minutes before using it.
    • Adjust the Sharpness setting on the Image menu. See Adjusting the Image.
    • If you're projecting from a computer, you may need to adjust the Tracking and Sync settings. See Adjusting Signal Settings.
Published:  Apr 29, 2009 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​