text.skipToContent text.skipToNavigation
Home Support Projectors PowerLite Series Epson PowerLite 1915

I see static or noise in the image. What should I do?

    Check the following:
    • If you're using a computer cable longer than 6 feet (2 meters), or an extension cable, the image quality may be reduced.
    • Keep your computer and video cables separated from the power cord as much as possible to prevent interference.
    • If you're using an extension cable, you may pick up interference if the cable is not adequately shielded. You may need to use a signal amplifier for longer cables.
    • If you are projecting from a laptop computer, try turning off simultaneous display on the laptop screen to avoid splitting the video signal.
    • Check the settings on the projector's Signal menu to make sure they match the video source.
    • Select a computer video resolution that is compatible with the projector.
    • If you are projecting from a computer, press the Auto button on the remote control to automatically adjust the tracking and sync settings.
    • If you adjusted the image shape using the projector controls, try decreasing the Sharpness setting to improve image quality.
Published:  Dec 22, 2009 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address