text.skipToContent text.skipToNavigation
Home Support Projectors PowerLite Series Epson PowerLite 4200W

How do I set a password on my product?

    Follow these steps to set a password or change an existing one:
    1. Press the Freeze button on the remote control for about five seconds.
    2. Use the  pointer button to select Password and press Enter.
    3. When you see a message asking if you want to change the password, select Yes and press Enter.
    4. Hold down the Num button on the remote control and use the numeric keypad to enter a four digit password. (The default setting is 0000.)
    5. When you see a confirmation message, reenter the password. Then press the Menu button to exit the screen.
    To set any of the projector's security options, access the Password Protect screen as described above, and then turn on any of the following options:
    • Power On Protect—Prevents unauthorized use of the projector. After the projector is plugged in and turned on, you must enter a password to use the projector.
    • User's Logo Protect—Prevents your custom screen and display settings from being changed.
    • Network Protect—Locks the Network settings in the menu system

    Caution: If you lose the remote control, you will not be able to enter the password. Keep the remote control in a safe place at all times. Also, it's a good idea to write down your password.
Published:  Jan 20, 2011 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address