I forgot my product's password. What should I do?
Check the following:
- If you don't know the password, do not continue to enter the incorrect password. If you enter the password incorrectly three times in succession, the projector's operation is locked: You'll need to wait for the projector to switch to standby mode (approximately 5 minutes), disconnect and reconnect the power cord, then turn the projector on to redisplay the password screen. If an incorrect password is entered 30 times in a row, the projector will be locked and you'll need to contact Epson. (See Where To Get Help.)
- If you enabled the password before you set one and you see the prompt to enter the password, enter the default password 0000 to proceed.
- If you set a password and then enabled it, but have now forgotten it, you'll need to contact Epson with the request code number that appears in the Password Protect Release screen. (See Where To Get Help.)
Published: Feb 10, 2010 Was this helpful? Thank you for the feedback!