Nothing projects on the screen. What should I do?

• Try the following:
  • Check that the  power light is green (not flashing) and that the A/V Mute slide is open. Also press the A/V Mute button on the remote control to make sure the picture has not been turned off temporarily.
  • The projector may be in standby or sleep mode. If the  power light is orange, press the  power button to turn on the projector.
  • If the power was switched off and then on again, the projector may be cooling down. Wait until the  power light stops flashing and remains orange; then press the  power button again.
  • If you are projecting from a computer, it may be in sleep mode or displaying a black screen saver. Try pressing a key on the computer.
  • If you are projecting from a DVD player or other video source, make sure you turn it on and press its Play button.
  • If you are projecting from a composite or S-Video video source, make sure the Video Signal setting is correct. See Adjusting Signal Settings.
  • You can also try resetting all of the menu settings. See Restoring the Default Settings.