Only part of the picture is displayed or the image looks distorted. What should I do?

• Check the following:
  • Press the Auto button on the remote control or the Enter button on the projector.
  • Make sure the image Position setting is correct in the Signal menu. See Adjusting Signal Settings.
  • If you are displaying from a computer using the Computer (Component Video) port on the projector, press the Aspect button on the remote control to select a different aspect (width to height) ratio (see Resizing Video Images) or select the correct Aspect setting from the Signal menu (see Adjusting Signal Settings).
    
    Note:
    You cannot change the aspect ratio when displaying from a computer using the USB TypeB port or from a USB device using the USB source on the EX5200/EX7200.
  • Press the Esc button on the remote control to cancel the E-Zoom function.
  • Make sure your computer's resolution setting is correct. See Compatible Video Formats.
  • You also may need to modify existing presentation files if you created them for a different resolution. See your software documentation for specific information.