There is no sound. What should I do?
Try the following solutions:
- Press a Volume button on the remote control or projector control panel to adjust the volume.
- Press the A/V Mute button to resume video and audio if they were temporarily stopped.
- Press the Source Search button to switch to the correct input source, if necessary.
- Check your computer or video source to make sure the volume is turned up.
- Check the audio cable connections between the projector and your video source.
- If you do not hear sound from an HDMI source, set the connected device to PCM output.
- Make sure any connected audio cables are labelled No Resistance.
Published: Feb 2, 2011 Was this helpful? Thank you for the feedback!