Support Projectors PowerLite Series Epson PowerLite 915W

Part of my image is blurred or out of focus. What should I do?

  • Try the following:
    • Adjust the image focus.
    • Clean the projector lens.

      Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it.
    • Position the projector close enough to the screen, and directly in front of it.
    • Position so the keystone adjustment angle is not so wide that it distorts the image.
    • Turn on automatic keystone adjustment in the projector's menu.
    • Adjust the Sharpness setting to improve image quality. See Image Quality Settings.
    • If you are projecting from a computer, press the Auto button on the remote control to automatically adjust the tracking and sync. If any bands or overall blurriness remains, display a uniformly patterned image on the screen and manually adjust the Tracking and Sync settings. See Input Signal Settings.
Published:  Feb 2, 2011 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​