My networked product is displaying an Event ID error code. What should I do?
If the Event ID option on the Info menu displays a code number, check the following list of Event ID codes for the solution to the projector problem associated with the code.
|Event ID Code||Cause and Solution|
|0432||The EasyMP Network Projection program did not start. Turn the projector off and then on again.|
|0434||Unstable network communication. Check the network communication status, wait a few moments, and try connecting to the network again.|
|0433||Cannot display the transferred images. Restart the EasyMP Network Projection program.|
|0481||Communication with computer was disconnected. Restart the EasyMP Network Projection program.|
|0483||The EasyMP Network Projection program quit unexpectedly. Check the network communication status, then turn the projector off and then on again.|
|0479||A projector system error occurred. Turn the projector off and on again.|
|0891||Cannot find an access point with the same SSID. Set your computer, access point, and projector to the same SSID.|
|0892||The WPA/WPA2 authentication does not match. Make sure the wireless network security settings are correct.|
|0893||The WEP/TKIP/AES encryption type does not match. Make sure the wireless network security settings are correct.|
|0894||Communication with unauthorized access point was disconnected. Contact your network administrator.|
|0898||Failed to acquire DHCP. Make sure the DHCP server is operating correctly. If you are using DHCP, turn off the DHCP setting in the Network Menu.|
|0895||A communication error has occurred. Try restarting the EasyMP Network Projection program and restarting your projector. If that does not resolve the problem, contact Epson for help.|
Published: Jun 26, 2012 Was this helpful? Thank you for the feedback!