The product's power will not turn on. What should I do?
Try the following solutions:
- Make sure the power cord is connected and the power switch on the back of the projector is turned on. Then wait a moment for the power button to light up before pressing the power button on the projector or the On button on the remote control.
- If you've set the Control Panel Lock, the control panel buttons are disabled except the power button; you must use the remote control to turn on the projector. To disable Control Panel Lock, press and hold the Enter button on the projectors control panel for at least 7 seconds. See Locking the Projector.
- If you've set the Child Lock, you have to press the power button on the projector for 3 seconds to turn on the projector, or use the remote control. See Locking the Projector.
Published: Dec 2, 2011 Was this helpful? Thank you for the feedback!