How do I clean the Obstacle Sensor?

• Clean the projector's obstacle sensor glass (circled in red) periodically, or if you see a message telling you to remove any obstacles that are interfering with the projection area.

  

  • To remove dust or smudges, gently wipe the obstacle sensor glass with lens-cleaning paper.
  • To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the obstacle sensor glass.

    Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the projector lamp may cause a fire.

    Caution:
    Do not used canned air, or the gases may leave a residue.