Part of my image is blurred or out of focus. What should I do?

• If the projected image is fuzzy or blurry, try the following solutions:
  • Adjust the image focus.
  • Clean the projector lens.

    Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it.

  • Position the projector close enough to the screen, and directly in front of it.
  • If you are projecting from a computer, press the Auto button on the remote control to automatically adjust the tracking and sync.
  • Repeat the Screen Fit process to superimpose the projector's images. See your Setup Guide
  for instructions.
  • If you are projecting from a computer, use a lower resolution.
  Related references
  Projection Distance
  Related tasks
  Focusing the Image Using the Focus Ring
  Cleaning the Lens