Support Projectors PowerLite Series Epson PowerLite Home Cinema 2030

Part of my image is blurred or out of focus. What should I do?

  • If the projected image is fuzzy or blurry, try the following solutions:
    • Adjust the image focus.
    • Clean the projector lens.

      Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it.

    • Position the projector close enough to the screen.
    • Position the projector so the keystone adjustment angle is not so wide that it distorts the image.
    • Turn on automatic keystone adjustment in the projector's menus.
    • Adjust the Sharpness setting to improve image quality.
    • If any bands or overall blurriness remain, display a uniformly patterned image on the screen and manually adjust the Tracking and Sync settings.
    • If you are projecting from a computer, use a lower resolution.
Published:  Sep 6, 2013 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​