text.skipToContent text.skipToNavigation
Home Support Projectors BrightLink Series Epson BrightLink 595Wi

How do I set my product for Extended Desktop in Windows 7 and Windows 8?

    You need to adjust the projector's Easy Interactive Function settings and the computer's Tablet PC setting to enable Extended Desktop. Do the following:

    Easy Interactive Function settings

    1. Press the Menu button, select the Extended menu, and press Enter.
    2. Select the Easy Interactive Function setting and press Enter.
    3. Select Pen Operation Mode in the PC Interactive section and press Enter.
    4. Select Mode 2 and press Enter.

    Tablet PC settings (Windows 7 & 8)

    1. Go to Control Panel > Hardware and Sound > Tablet PC Settings.
    2. Select Epson PJ under Display options, then click Setup under Configure.
    3. Select Pen input.

      You see a white screen projected from the primary projector with the message: Tap this screen with your interactive pen to set it as the Tablet PC screen.
    4. Tap or touch the primary projector screen with the interactive pen or your finger and press Enter.
    5. You see a white screen projected from the secondary projector with the message: Tap this screen with your interactive pen to set it as the Tablet PC screen.
    6. Tap or touch the secondary projector screen with the interactive pen or finger and press Enter.
    7. Click OK.
Published:  Apr 30, 2015 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address