text.skipToContent text.skipToNavigation
Home Support Projectors BrightLink Series Epson BrightLink 575Wi

Can my product do rear projection?

    Yes. You can change the projection mode using the remote control or by changing a menu setting.

    Projection Modes

    Depending on how you positioned the projector, you may need to change the projection mode so your images project correctly.

    • Front/Upside Down (default setting) flips the image over top-to-bottom to project upside-down from a wall or ceiling mount. This mode should also be used when you mount the projector vertically on a table to create an interactive work surface.
    • Front lets you project from a table in front of the screen.
    • Rear/Upside Down flips the image over top-to-bottom and horizontally to project from the wall or ceiling and behind a translucent screen.
    • Rear flips the image horizontally to project from behind a translucent screen.

    Note: The two Rear modes cannot be used with the interactive pens.

    You can change the projection mode using the remote control or by changing the Projection setting in the Extended menu.

    Changing the Projection Mode Using the Remote Control

    You can change the projection mode to flip the image over top-to-bottom.
    1. Turn on the projector and display an image.
    2. Hold down the A/V Mute button on the remote control for five seconds.

      The image disappears briefly and reappears flipped top-to-bottom.
    3. To change projection back to the original mode, hold down the A/V Mute button for five seconds again.

    Changing the Projection Mode Using the Menus

    You can change the projection mode to flip the image over top-to-bottom and/or left-to-right using the projector menus.
    1. Turn on the projector and display an image.
    2. Press the Menu button.
    3. Select the Extended menu and press Enter.
    4. Select the Projection setting and press Enter.
    5. Select a projection mode and press Enter.
    6. Press Menu or Esc to exit the menus.
Published:  May 9, 2014 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address