Home Support Projectors PowerLite Series Epson PowerLite Pro Z9800W

How do I connect my iOS or Android device to my product?

  • You can connect an iOS or Android device to the projector wirelessly using the iProjection app. See Epson iProjection for iOS Setup or Epson iProjection for Android Setup for instructions.

    To do this, you must install the Epson 802.11b/g/n wireless LAN module, and then set up your projector and computer for wireless projection.

    Note: The wireless LAN module is not included with the projector. You can purchase the Wireless LAN Module (part number V12H418P12) from the Epson Store.

    You can also connect an iOS or Android device to the projector using an adapter and a video-out connector such as a VGA, Video, or HDMI.

    Do the following:

    1. Turn off the iOS or Android device and the projector.
    2. Connect one end of the VGA, Video, or HDMI adapter to the iOS or Android device.
    3. Connect the other end of the cable to the appropriate port on the projector.
    4. Turn on the iOS or Android device, then turn on the projector.
Published:  Oct 7, 2014 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address