Support Projectors BrightLink Series Epson BrightLink 536Wi

How do I connect my iOS or Android device to my product?

  • You can connect an iOS or Android device to the projector wirelessly using the iProjection app. See Epson iProjection for iOS Setup or Epson iProjection for Android Setup for instructions.

    To do this, you must install the Epson 802.11b/g/n wireless LAN module, then set up your projector and computer for wireless projection. If your projector is connected to a wired local area network (LAN) with a 100Base-TX or 10Base-T network cable and the network includes a wireless access point, the wireless LAN module is not needed.

    Note: The wireless LAN module is not included with the projector. You can purchase the Wireless LAN Module (part number V12H418P12) from the Epson Store.

    You can also connect an iOS or Android device to the projector using an adapter and a video-out connector, such as a VGA, Video, or HDMI cable.

    Do the following:

    1. Turn off the iOS or Android device and the projector.
    2. Connect one end of the VGA, Video, or HDMI adapter to the iOS or Android device.
    3. Connect the other end of the cable to the appropriate port on the projector.
    4. Turn on the iOS or Android device, then turn on the projector.
Published:  Feb 9, 2015 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​