Support Projectors BrightLink Series Epson BrightLink 536Wi

How do I adjust my product settings for rear and/or ceiling placement?

  • Do the following:
    1. Press the Menu button.
    2. Select the Extended menu, then press Enter.
    3. Select Projection, then press Enter. Select your desired setting.






    4. Press Menu to close the menu.

    Note: Interactivity is not available when using rear or rear ceiling projection.

    You can also change the projection settings from Front to Front/Ceiling or from Rear to Rear/Ceiling by pressing and holding the A/V Mute button on the remote control for 5 seconds or until an image appears.

    Note: To project from overhead or wall-mounted, you'll need to use the optional ceiling or wall mount hardware. You can purchase the ceiling mount (part number ELPMBPJF) or wall mount (part number V12H706020) from the Epson Store or an authorized Epson reseller. If you need a mount that extends more, you can also purchase an adjustable extension column (ELPMBC01).

Published:  Feb 10, 2015 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​