Home Support Projectors PowerLite Series Epson PowerLite Pro G6570WU

I see static or noise in the image. What should I do?

  • If the projected image seems to contain electronic interference (noise) or static, try the following solutions:
    • Check the cables connecting your computer or video source to the projector. They should be:
      • Separated from the power cord to prevent interference
      • Securely connected at both ends
      • Not connected to an extension cable
      • No longer than 10 feet (3 m) for VGA/computer cables or 24 feet (7.3 m) for HDMI cables
    • Check the settings on the projector's Signal menu to make sure they match the video source. If available for your video source, adjust the Progressive and Noise Reduction settings.
    • Select a computer video resolution and refresh rate that are compatible with the projector.
    • If you are projecting from a computer, press the Auto button on the remote control to automatically adjust the tracking and sync. If the problem remains, display a uniformly patterned image on the screen and manually adjust the Tracking and Sync settings.
    • If you connected an extension power cable, try projecting without it to see if it caused interference in the signal.
    • For sources connected to the DisplayPort, change the DisplayPort EQ Setting in the Signal menu.
    Related tasks
    Displaying From a PC Laptop
    Displaying From a Mac Laptop
    Related references
    Input Signal Settings - Signal Menu
    Supported Video Display Formats
Published:  Mar 18, 2015 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​
Please enter a valid email address