How do I establish a connection between the 3D glasses and the projector?
Pair the glasses with the projector to establish communication between them for 3D viewing.
- Turn on the projector.
- Set the image source to HDMI on the projector.
- Project a 3D image.
- Slide the power switch on the 3D glasses to the On position.
- Move the glasses within 10 feet (3 m) of the projector and hold down the Pairing button for at least three seconds.
The status light on the glasses flashes green and red. If pairing is successful, the light turns green for 10 seconds and then turns off.
Published: Aug 8, 2016 Was this helpful? Thank you for the feedback!