How can I improve the image quality?
Make sure you've selected the best Color Mode for your picture and viewing environment. Then use the settings in the Image menu to finish adjusting the picture.
- Set the Deinterlacing setting to Off
- Selected a digital RGB or an interlaced (480i/576i/1080i) input signal
If you are viewing video from a device connected to the projector's Video or S-Video port, adjust the Deinterlacing and Noise Reduction settings, if available for your video source.
For best results, connect your video equipment to the HDMI port, if possible. If your equipment doesn't support HDMI, connect it to one of the following ports (highest quality listed first): Computer with a VGA-to-component adapter cable (for component video), S-Video (PowerLite 640/740HD only), or Video (for composite video).
Note: The Noise Reduction setting is not available if you have done the following:
Image Quality Settings - Image Menu